How to Safely Remove Gorilla Glue from Your Hands

how to get gorilla glue off hands


Gorilla Glue is a powerful adhesive known for its strength and versatility in various DIY and repair projects. However, it’s not uncommon to accidentally get this sticky substance on your hands during the process, and removing it can be quite challenging. In this article, we will explore effective methods for safely getting Gorilla Glue off your hands without causing harm to your skin.

Act Quickly

The key to successfully removing Gorilla Glue from your hands is to act swiftly. As soon as you notice the adhesive on your skin, take immediate action. The longer the glue remains on your hands, the more difficult it will be to remove.

Avoid Aggressive Scrubbing

One common mistake people make when trying to remove Gorilla Glue is aggressive scrubbing or picking at the adhesive. This can damage your skin and make the situation worse. Instead, opt for gentle methods to minimise irritation.

Soap and Water

The simplest way to begin the removal process is by using soap and warm water. Start by washing your hands with soap and water, focusing on the glued areas. Gently rub your hands together to help break down the adhesive. For smaller amounts of Gorilla Glue, this may be sufficient to remove it.

Acetone (Nail Polish Remover)

If soap and water alone are not effective, acetone, commonly found in nail polish remover, can help dissolve the Gorilla Glue. To use acetone

  • Soak a clean cloth or cotton ball in acetone.
  • Gently rub the glued areas, applying light pressure.
  • Continue until the glue starts to soften and peel off your skin.

Take care not to overuse acetone, as it can dry out your skin. Ensure proper ventilation when using acetone and avoid contact with your eyes or mouth.

Lemon Juice

Lemon juice contains natural acids that can help break down adhesive substances. Here’s how to use it

  • Squeeze fresh lemon juice into a bowl or onto a cloth.
  • Rub the lemon juice over the glued areas.
  • Allow it to sit for a few minutes, and then gently rub the glue to remove it.

Rinse your hands with water afterward to remove any residual lemon juice.

Cooking Oil

Cooking oils such as vegetable oil, olive oil, or coconut oil can work as effective solvents to loosen Gorilla Glue. Follow these steps

  • Apply a generous amount of cooking oil to the glued areas.
  • Gently massage the oil into your skin.
  • Allow it to sit for a few minutes, then start rubbing the glue to break it down.

Rinse your hands with soap and water once the adhesive is removed.

Pumice Stone

For more stubborn cases of Gorilla Glue on your hands, a pumice stone can be a useful tool. Here’s how to use it safely

  • Wet the pumice stone with water.
  • Gently rub the glued areas with the stone, using light, circular motions.
  • Be cautious not to scrub too aggressively, as pumice stone can be abrasive.

Petroleum Jelly

Petroleum jelly, like Vaseline, can be used to soften Gorilla Glue and make it easier to remove. Follow these steps

  • Apply a thick layer of petroleum jelly to the glued areas.
  • Allow it to sit for a while, usually 10-15 minutes.
  • Gently rub your fingers together to loosen the adhesive.
  • Wipe away the petroleum jelly and dissolved glue with a clean cloth.

Sandpaper (Last Resort)

In extreme cases where other methods have failed, very fine sandpaper (around 600-grit) can be used as a last resort. However, extreme caution is necessary to avoid skin irritation or damage. Follow these steps

  • Gently sand the glued areas in one direction.
  • Be extremely gentle and take frequent breaks to check your progress.
  • Stop if you experience any discomfort or if the glue begins to peel away.


How do you get dried super glue off your skin?

Get a greasy product: Rub an oily, skin-safe substance onto the area. “Try hand lotion, mineral oil, petroleum jelly or vegetable oil,” Dr. Anthony says. “The oil breaks down the cyanoacrylate bond.” After massaging the oil into your skin, try gently tugging the stuck area off without forcing it.

Does hot water remove Gorilla Glue?

If you do get Gorilla Glue on your fingers or nails please follow these steps: Try removing the glue with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with a gritty soap and warm water, or using an exfoliator with a gritty texture.


Accidentally getting Gorilla Glue on your hands can be frustrating, but with the right approach, it is possible to safely remove the adhesive without causing harm to your skin. Remember to act quickly, avoid aggressive scrubbing, and use gentle methods like soap and water, acetone, lemon juice, cooking oil, or petroleum jelly. If all else fails, consider using a pumice stone or very fine sandpaper as a last resort. By following these tips, you can effectively rid your hands of Gorilla Glue and continue your DIY projects with ease.

Read Also :  LG IMS Keeps Stopping – Troubleshooting and Fixes